WITH DECADES OF CONSTRUCTION AND BUILDING EXPERIENCE, WE CAN PROVIDE THE BEST SYSTEM FOR YOUR NEEDS.

COST EFFECTIVE

Our 5-in-1 panels have framing, insulation, thermal brake, pest resistants and vapor barrier included in your cost. With faster install times saving on labor and cost over the life of your project.

SAFETY

The EPS that we use is non-toxic and VOC-free, which is unlike most spray foam insulations. Our system is also mold-resistant, does not breakdown into dust allergens, not a source of food for pests and has *low smoke and flame spread.

*IHP stands for insulated hybrid panel

*IFP stands for Insulated Framing Panel

SUSTAINABILITY

The little amount of leftover EPS, wood and steel from producing panels is either recycled or repurposed to ensure we're not filling up landfills. Your end product will use less energy helping with the sustainable energy efforts.

    1. Exterior coated steel studs and coated steel track for top/bottom plate of the panel providing a bug and rot proof exterior combined with an EPS core that is not a food source for mold or pest.

    2. Interior wood studs provide an easier interior finish out than steel studs that usually require provisions for wiring and commercial type metal fasteners for hanging dry wall and base trim.

    3. lighter then traditional SIP panels and can be installed without heavy equipment.

    4. Wood/steel stud configuration save up to 20% of wood used in conventional building practices then with wood studs alone.

    5. Have a modeled performing R-value of 31+ (5.5” wall panels)

    6. They can be field altered quickly and without special tools.

    7. Horizontal wire chases/windows/doors are all pre-cut before delivery to site.

    8. Steel studs perform better in a structure fire

    1. Standard stud hight panels utilize traditional framing methods to install (nail gun and screw gun only tools needed) and stay thermally broke at the studs.

    2. *IFP panels Have a modeled performing R-value of 31+ (5.5” wall panels)

    3. Install up to 50% faster then conventional framing methods.

    4. lighter then traditional SIP panels and can be installed without heavy equipment.

    5. can be field altered quickly and without special tools.

    6. Horizontal wire chases/windows/doors are all pre-cut before delivery to site.

  • Depending on what thickness is ordered TBS Panels have nominal R-values from 22 to 48 as a wall assembly.

    modeled performance R-values from 31 to 57.

    Explanation of modeled performance can be found on panel technical page.

  • ThermaTech panels are easy to install and can be field altered on the job. All window and doors are pre-cut to your prints specifications with pre-cut insulated headers and bucks designed to accommodate standard door and window installations seamlessly without needing onsite modifications to our panels. Hardware to install our system is included and arrives on site with panels. Panels also come with easy-to-follow shop drawings for setting up the structure. Making our panels ideal as a cross over panel from traditional framing for residential and commercial applications.

  • Every panel has an open horizontal cut chase for installing and inspecting wiring, along with vertical chases at doors.

    Plugs can be sent on request to plug chase over wire after install and inspections are done.

  • By virtually eliminating thermal bridging at the studs and greatly mitigating air infiltration with tongue and groove connections our panels have greater performing R-values then conventional building options. Optimizing energy efficiency and year-round comfort for your residential and commercial projects

    The EPS foam used in our panels maintains a constant R-value throughout the life of the structure. Our panels won’t shrink or diminish in any way over time leaving air gaps like loose fill alternatives.

  • Our panels use EPS foam that does not off-gas in your home after installation.

    Has an ozone depletion potential of 0 and global warming potential of less then 5 scoring A+ for green products.

    Can be engineered to work without wood sheathing such as OSB eliminating up to 30% of wood used in standard construction practices,

    There is little to no waste at the project site with our products being fully manufactured before being sent to the site.

    Our manufacturing plant recycles or repurposes waste created during the process of making our products.

    Our panels will lower your projects lifetime energy consumption helping with sustainable energy efforts and your energy bills.

  • When our panel system is used in conjunction with interior finishes such as dry wall and exterior siding options the smoke and flame spread are better then more traditional ways of insulating.

  • Our panels, can have a load baring rating of up to 2500 Ib per linear ft. (depending on stud type and configuration used)

  • **our panels have passed wind test up to 200 mph**

    **must use IHP panel and Engineering is required to achieve this**

    **not projectile tested**

  • Our panels come in thicknesses

    from 5.5" to 12" thick

    widths up to 4'

    lengths up to 18'

CAN YOU AFFORD NOT TO USE hybrid panels?

To understand our system best, you first have to understand what an "R-value" actually is. Once you understand that, our system and why it is superior will make sense. With energy costs on the rise, you can't afford not to know about this.

SO THEN, WHAT IS AN R-VALUE?

• R-value is a measure of thermal resistance in construction materials.

• R-value indicates how well a material insulates against heat flow.

• A higher R-value signifies better insulation and resistance to heat transfer.

• Proper insulation with higher R-values can contribute to energy efficiency in buildings.

Click to read the R-Value Myth for more information.